Gjornâl Furlan des SiencisFriulian Journal of Science

No. 7 (2006): GFS
RASSEGNIS

Fibris e tele o rêt, la gnove frontiere des maltis armadis cuintrisismichis… tes olmis di Imhotep “Ptahmosi”

PDF
  • ALESSANDRO BACHIORRINI
ALESSANDRO BACHIORRINI
Dipartiment di Siencis e Tecnologjiis Chimichis, Universitât dal Friûl, Udin, Italie.

Peraulis clâf

  • Malte a pulvins reatîfs rinfuarçade cun fibris (RPMFR),
  • malte a pulvins reatîfs rinfuarçade cun tiessûts (RPMCR),
  • malte a pulvins reatîfs rinfuarçade cun fibris e tiessûts (RPMFaCR),
  • stabiliduris cuintrisismichis

Cemût citâ

[1]
BACHIORRINI, A. 2006. Fibris e tele o rêt, la gnove frontiere des maltis armadis cuintrisismichis… tes olmis di Imhotep “Ptahmosi”. Gjornâl Furlan des Siencis - Friulian Journal of Science. 7, 7 (Dec. 2006), 121–137.

Ristret

La malte a pulvins reatîfs (RPM) rinfuarçade cun fibris e je un materiâl miscliç moderni une vore bon par tirâ sù stabiliduris cuintrisismichis e rivâ a meti in sigurece lis cjasis vieris e ancjemò abitadis. Par altri (sicu 4000 agns indaûr Ptamosi al veve mostrât cui siei modons di arzile, savalon, stran e tele di lin) la resistence di un materiâl miscliç di cheste fate e pues jessi ancjemò di plui incressude cubiant l’efiet rinfuarçant di un tiessût cun chel des fibris. Tal articul, i risultâts plui significatîfs des ricercjis sperimentâls fatis su lis RPM rinfuarçadis cun tiessûts e fibris diviersis a son scrutinâts e confrontâts cun chei des RPM rinfuarçadis dome cun fibris, rivant a la conclusion che la resistence al taramot des maltis armadis cun tiessûts e fibris e je une vore plui grande che chê des maltis armadis dome cun fibris.

PDF

Riferiments

  1. Davidovits J. (1988). The Famine Stele provides the Hieroglyphic Names of Chemicals and Minerals involved in the Construction of Pyramids. Presented at the Vth International Congress of Egyptology. Cairo (Egypt).
  2. Davidovits J. (1984). X-Ray Analysis and X-Ray Diffraction of Casing Stones from the Pyramids of Egypt, and the Limestone of the Associated Quarries. Science in Egyptology Symposia, pp. 511-520.
  3. Davidovits J., Bonett A., Mariotte A.M. (1982). Disaggregation of Stone Materials with Organic Acids from Plant Extracts, an Ancient and Universal Technique. Proceedings of the 22nd Symposium on Archaeometry. Bradford (UK): University of Bradford, pp. 205-212.
  4. Davidovits J., Al Iaga F. (1981). Fabrication of Stone Objects, by Geopolymeric Synthesis, in the Pre-incan Huanka Civilisation (Peru). Abstract of the Paper presented at the 21st International Symposium for Archaeometry Brookhaven National Laboratory. New-York (USA), pp. 21.
  5. Davidovits J. (1993). Des bétons antiques aux géopolymères. Arts et Métiers Magazine, 180: 8-16.
  6. Shah S.P., Rangan B.V. (1971). Fiber Reinforced Concrete Properties. ACI Journal, 68: 126-135.
  7. Johnston C.D. (1974). Steel Fiber Reinforced Mortar and Concrete: a Review of Mechanical Properties. ACI International Symposium, 44-7: 127-207.
  8. Johnston C.D., Coleman R.A. (1974). Strength and Deformation on Steel Fiber Reinforced Mortar in Uniaxal Tension. ACI International Symposium, 44-10: 177-193.
  9. Swamy R.N., Magat P.S., Rao C.V.S.K. (974). The Mechanism of Fiber Reinforcement of Cement Matrices. ACI International Symposium, 44-1: 1-28.
  10. Swamy R.N., Mangat P.S. (1974). A Theory for the Flexural Strength of Steel Fiber Reinforced Concrete. Cement and Concrete Research, 4-2: 313-325.
  11. Swamy R.N., Mangat P.S. (1974). Influence of Fiber Geometry on the Properties of Steel Fiber Reinforced Concrete. Cement and Concrete Research, 4: 451-465.
  12. Swamy R.N., Mangat P.S. (1974). Influence of Fiber Aggregate Interaction on some Properties of Steel Fiber Reinforced Concrete. Cement and Concrete Research, 7-41: 307-314.
  13. Parameswaran V.S., Rajagopalan K. (1975). Strength of Concrete Beams with Aligned or Random Steel Fibre Micro-reinforcement. Rilem Neville Symposium, 3-5: 95-103.
  14. Jejcic D., Zanghellini F. (1977). Mortiers et ciments arme’s de fibres. Annales de l’Institut Tecnique du batiment et des Travaux Publics, 347: 45-84.
  15. Naranyanan R., Reem K.A., Palanjian A.S. (1983). Steel Fiber Reinforced Concrete Beams in Torsion. The International Journal of Cement Composites, 5-4: 235-246.
  16. Soroushian P., Bayasl Z. (1991). Strength and Ductility of Steel Fibre Reinforced Concrete Under Bearing Pressure. Magazine of Concrete Research, 43.
  17. Richard D., Cherezy M.H. (1994). Reactive Powder Concrete with High Ductility and 200-800 MPa Comprensive Strength. San Francisco: ACI Spring Convention, pp. 507-518.
  18. Richard P., Cheyrezy M. (1995). Composition of Reactive Powder Concretes. Cement and Concrete Research, vol. 25, n. 7.
  19. Coppola L., Collepardi M., Troli M. (1995). Materiali cementizi innovativi: dagli HPC verso gli RPC. Parte I. I calcestruzzi ad alte prestazioni. L’Industria Italiana del Cemento, 697: 189-198.
  20. Collepardi M. (1996). Calcestruzzi ad altissima resistenza: HPC, DSP ED RPC. Atti del seminario CIAS, Evoluzione della sperimentazione per le costruzioni, pp. 289-314.
  21. Dugat J., Roux N., Bernier G. (1996). Mechanical Properties of Reactive Powder Concretes. Materials and Structures, 29: 233-240.
  22. Carpinteri A., Ceriani R., Iori I. (1996). Analisi del comportamento di calcestruzzi fibrorinforzati mediante la meccanica della frattura. Studi e Ricerche, n. 17. Collepardi S., Coppola L., Troli M., Collepardi M. (1997). Mechanical Properties of Modified Reactive Powder Concrete. Roma: Fifth CANMET/ACI International Conference, pp. 1-21.
  23. Coppola L., Troli R., Borsoi A., Zafferoni P., Collepardi M. (1997). Influence of Superplasticizer Type on the Compresive Strenght of Reactive Powder Mortars. Roma: Fifth CANMET/ACI International Conference Superplasticizers and Other Chemical Admixture in Concrete, V.M. Malhotra.
  24. Rossi P. (1997). High Performance Multimodal Fiber Reinforced Cement Composites (HPMFRCC): The LCPC Experience. ACI Materials Journal, 94-6: 478-483.
  25. Collepardi S., Coppola L., Collepardi M. (1997). Calcestruzzo a polvere reattiva modificato. Milano: Atti del convegno FAST, Ricerche e prospettive tecnologiche alle soglie del 2000, pp. 497-504.
  26. Bonneau O., Lachemi M., Dallaire E., Dugat J., Aïtcin P.C. (1997). Mechanical Properties and Durability of Two Industrial Reactive Powder Concretes. ACI Materials Journal, vol. 94-4.
  27. Van Houwaert A., Delauay F., Thimus J.F. (1999). Cracking Behaviour of Steel Fiber Reinforced Concrete revealed by Means of Acoustic Emission and Ultrasonic Wave Propagation. ACI Materials Journal, vol. 96-3.
  28. Banthia N., Dubay A. (2000). Measurement of Flexural Toughness of Fiber-Reinforced Concrete using a Novel Technique Part 2: Performance of various composites. ACI Materials Journal, vol. 97-1.
  29. Guerrero P., Neaman A.E. (2000). Effect of Mortar Fineness and Adhesive Agents on Pullout Response of Steel Fibers. ACI Materials Journal, vol. 97-1.
  30. Jamal M., Shannag, Hansen W. (2000). Tensile Properties of Fibre-Reinforced very high Strenght DSP Mortar. Magazine of Concrete Research, vol. 52-2.
  31. Oh B.H., Lim D.H., Yoo S.W., Kim E.S. (2000). Shear Behaviour and Shear Analysis of Reinforced Concrete Beams Containing Steel Fibres. Magazine of Concrete Research, vol. 52-1. Plizzari G.A., Cangiano S., Cere N. (2000). Post-Peak Behaviour of Fiber-Reinforced Concrete
  32. under Cyclic Tensile Loads. ACI Materials Journal, vol. 97-2.
  33. Singh S.P., Kaushik S.K. (2000). Flexural Fatigue Life Distribution and Failure Probability
  34. of Steel Fibrous Concrete. ACI Materials Journal, vol. 97-6.
  35. Singh S.P., Kaushik S.K. (2001). Flexural Fatigue Analysis of Steel Fiber-Reinforced Concrete.
  36. ACI Materials Journal, vol. 98-4.
  37. Bachiorrini A. (2003). RPM: maltis armadis par meti in sigurece lis vieris cjasis cuintri i dams
  38. dal taramot. Gjornâl Furlan des Siencis / Friulan Journal of Science, 3: 97-113.
  39. Bachiorrini A., Foghini G. (2005). Perché e come adoperare fibre organiche per rinforzare
  40. malte. Enco Journal 28: 15-20.